Take the 2-minute tour ×
Arqade is a question and answer site for passionate videogamers on all platforms. It's 100% free, no registration required.

Ok I have a turtle mining, and filling Enderchest(a1) with it's payload. I have buildcraft pipes emptying Enderchest(a2) into Diamond chest(1).

I wanted to have a second set of pipes emptying Diamond chest(1) into Diamond chest(2) effectivly increasing my mining storage to the size of 2 Diamond Chests. This will work until we have enough items to fill Diamond chest(2) at which point the system continues to pull things out of Diamond chest(1) and spit them onto the ground. How can I circumvent this?

share|improve this question
add comment

4 Answers 4

up vote 1 down vote accepted

Two options:

First, use buildcraft Gates, that is what they where designed for!

Have one gate detecting if there is space in the destination inventory, have a 2nd aurtatic gate connected by a pipe signal pulling out of the first chest.

A 2nd option, put a turtle between the two chests, you already said you have computer craft, just put a turtle between the two chests and have this simple program run on startup. It sucks 16 stacks of items from the below chest and tries to place it in the above chest.

function suckItems()
  for slot = 1, 16 do
    turtle.select(slot)
    turtle.suckDown()
  end
end

function dropItems()
  for slot = 1, 16 do
    turtle.select(slot)
    turtle.dropUp()
  end
end

while(true) do
  suckItems()
  dropItems()
  os.Sleep(1) --This may be unnecessary
end

for fastest speed I am assuming your layout is

[X] = Chest 2
[T] = Turtle
[X] = Chest 1  (looking at from the front)

You could have it horizontal but you would need to make the turtle turn every time

share|improve this answer
    
im new to all of this, and never thought about doing this with a turtle, but it seems pretty obvious! awesome! –  Ender Jul 14 '13 at 0:00
add comment

Assuming you have the Applied Energistics, build a small ME network, and attach your chests to an ME Storage Bus and it'll only put items in to the chests if there is room. Also works on Barrels as well.

share|improve this answer
    
+1 for AE, very cost efficient, organizes items, even autocrafts –  wonton Jul 31 '13 at 21:55
add comment

One option is the use of a stone golem from Thaumcraft 3

Golem setup

  1. My quarry puts stuff into chest 1
  2. The iron golem on top grabs the items from the chest and places them in enderchest 2
  3. Another enderchest of the same type is then connected to a sorting system with routers(not pictured)
  4. If the router gets clogged because a barrel is full or he gets an unknown item the enderchest obviously fills up completely
  5. Once the enderchest is full the golem starts filling the other chests
    • For some reason he fills up the chest with number 3 on it first

The golem is a simple stone golem with no special core. Placing the chests close together means that the golem doesn't have to waste time moving.

In the end I have a buffer of 4 diamond chests, which can easily be expanded by placing more chests in the area (and mark them as a valid drop off point for the golem with a marker block)

share|improve this answer
    
Small warning: do not place this setup hooked to a quarry in the middle of your base, you will go insane of the constant chest opening of the golem. –  Arperum Jul 13 '13 at 23:08
add comment

Instead of piping items from Enderchest(1) to Enderchest(2), I can hook up Enderchest(2) to an obsidian pipe to suck up whatever pops out of Enderchest(1)

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.