Take the 2-minute tour ×
Arqade is a question and answer site for passionate videogamers on all platforms. It's 100% free, no registration required.

Is there any limit as to what size/type of hard drive you can replace in the Playstation 3?

share|improve this question

migrated from superuser.com Feb 28 '11 at 8:37

This question came from our site for computer enthusiasts and power users.

add comment

6 Answers 6

up vote 9 down vote accepted

There are a couple of things to bear in mind when upgrading the PS3 hard disk. To be explicit: physical size; storage capacity; type.

Physical size: The disk has to be a 2.5in laptop drive, and despite possible expectation, these are manufactured in slightly different sizes. Currently they come in 9mm and 12mm depths. The 12mm disk is too large to physically fit in the PS3 so you'll want to source a 9mm disk.

Storage capacity: It's not explicitly stated by Sony what the maximum is; however I don't think there has been a 9mm hard disk manufactured yet that has hit the limit. Last I heard 1TB disks were just about squeezing in the PS3.

Type: It has to be a SATA disk.

share|improve this answer
    
can it be Sata and SataII? –  tom Feb 28 '11 at 13:51
    
Do you think This size would be too big? Depth: 10 cm. Height: 9.5 mm –  tom Feb 28 '11 at 13:58
    
I might go for the 500GB Samsung HM500JI Spinpoint M7 –  tom Feb 28 '11 at 14:03
    
I believe SataII is OK. 9.5mm should be OK as I believe they round it down to 9mm for simplicity. Height is the only thing that generally changes between the 2.5in drives (it adds an extra disk platter inside the drive) so you shouldn't have to worry about the other dimensions. –  Paul McCabe Feb 28 '11 at 14:32
add comment

Digital Foundry put together a really good, in-depth comparison of the performance you can get out of different hard drive types (in particular, SSD vs traditional):

PS3 Hard Drive Upgrade Guide

In short, the SSD isn't as big of an improvement as you might expect, with some exceptions.

share|improve this answer
    
That is an amazingly interesting link. +1 –  James Skemp Jun 18 '11 at 21:28
add comment

CNET put together a piece on how to do it. Just get a 2.5" SATA drive and format it to FAT32 and you're good to go.

share|improve this answer
    
FAT32 is only used by the PS3 for external hard disks. Sony uses it's own proprietary format for the internal disk. –  Paul McCabe Feb 28 '11 at 12:10
add comment

Yes, it will see a 1TB as it's boot drive. Not talking external, which is of limited use. With the PS3 slim, "Advanced Format Drives" are not an issue. However, it will not format a boot drive bigger than 1 TB. I tried. https://www.facebook.com/notes/jeff-dranetz/maximum-logical-drive-size-for-ps3/10151679084920238 I used a SATA to eSATA PS3 extender kit. (see link) Using an external drive as a boot drive is achieved with a POWERED eSATA enclosure. I tried a eSATA cable powered unit, did not work. Anyway you don't want the new drive to over tax the PS3 PSU. Also, it will not add to console heat, I am guessing lengthening the life of the console itself. If you don't want to go this route, any laptop,hybrid, or SSD 2.5 drive 1 TB and under will work. I had a 500GB 7200 rpm laptop drive in before the upgrade with no adverse effects. Some have warned against heat and power requirements of 7200 rpm drives over 5400 drives. For the enclosure I ended up using a 1TB 3.5" Western Digital AV-GP drive., designed for always on use. An enterprise server drive might have been quicker. I would recommend a desktop drive over an enterprise drive due to the fact I keep the enclosure always on for convenience. Everytime I power on the PS3, it's already fully spun up.

share|improve this answer
add comment

I've done it and it's stupid easy. Just follow one of the zillion FAQs out there. One tip, grab the latest Sony firmware and dump it on a USB stick first. It will need that to reinstall/reformat the drive.

Make a backup, replace drive, install firmware, restore drive, reactivate system from the PSN menu. That's it.

share|improve this answer
add comment

The latest I've seen so far is 1TB, am using a 500GB SATA HDD with FAT32, once loaded into the PS3 system, it should be formatted and installed with the latest PS3 firmware.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.