How can I easily get a lot of Iron?

While iron isn't very rare, it is needed for a lot, especially if you want to build a structure out of it, build long railways or something like that.

What should you do to find/get a lot of iron with non-excessive effort (an inital effort for a good long-term solution is good though)?

-
Possible Duplicate: What's the most efficient Minecraft mining strategy – Ronan Apr 24 '11 at 21:36
@Ronan Forman: I use that, but I want a lot of iron and I don't think that is effective enough – Anto Apr 24 '11 at 21:41
@Ronan Not really; this is specific about iron, where more general approaches such as branch mining are unnecessary. – badp Apr 25 '11 at 8:43
@fail true, but I was expecting the same answers for both questions. – Ronan Apr 25 '11 at 9:00
Someone with more experience making them should give an answer about golem farms. – SevenSidedDie Dec 27 '12 at 17:56

Some tips:

1. Mine in the southwest quadrant (positive x and z), twice as much ore there (explanation) Fixed as of Beta 1.6
2. Become familiar with depths, see this guide. Iron lives under the sea level.
3. Don't branch mine: don't listen to that guide, or this answer. Since you're looking for iron, I suggest trying caves.

The "mathematical analysis" is seriously flawed, because you're not looking to get every single ore in the block. Instead, you want to get as much ore as possible per second. This means that you need to see as many "fresh blocks" as possible per second. Let's look at one statement made in the analysis:

Not bad. With every 2 blocks destroyed (or 8 seen), we get 3.7% iron. Halve that to get the value of one block, which is 1.83% iron per block. That means for every 54 blocks of stone we mine, we'll get 1 iron ore.

Except, whenever you add a turn to your mineshaft, your digging causes you to see the other faces of the same two blocks you just saw. So don't add turns - which is exactly what a branch mine does every 4 blocks. Furthermore, when you do find ore in your branch mine, you'll dig towards your other shaft, and this will let you see some blocks that... you already saw when you dug that other branch. If you're going to shaft mine, make it one long shaft at level 14.

So what about caves? How many "fresh blocks" do you see per second in a cave? Well... a lot. To get an estimate, I started a fresh game on normal, punched a couple trees, a couple stone picks, bunch of sticks, a sword. Found a decent cave system. Coal pretty quick, sticks became a bunch of torches, I hear groaning. Strategy? Run like a boss, place torches, look at ceilings, floors, nooks. Don't stand still. Found iron? Great: spot check for monsters, then mine it. It does spawn diagonally. Check anyway. Hit dead end? Go back, seal the cave shaft up with a horizontal line of cobble, so you don't go in again. I got 54 iron in 10 minutes of caving. And a lapis block. The guide says (I wouldn't trust the math) that I'll get that much in 21 minutes using branch mines. Caves are better. Also, cave mining is much more fun.

TL;DR: Go a ways SW of spawn (fixed as of Beta 1.6), find a cave system, go deeper than sea level. Run through it placing torches.

-
Branch mining is a generic method for hunting the more precious ores. Yes, it's overkill when looking for iron or coal; no, I don't think exploring caves (while fun!) is an efficient method for finding diamond. :) – badp Apr 25 '11 at 8:45
But the question wasn't about diamond. As for diamond, as I said, a long mineshaft beats branches, which are a waste of surface area. – user6234456 Apr 25 '11 at 13:38
I know the question isn't about diamonds. If you want to comment on the branch mining method I recommend you do so on the relevant answer, however. – badp Apr 25 '11 at 13:45
+1 "Also, cave mining is much more fun." This is my own experience. Go on a nice long walk, explore caves, come back ferrously rich. – SevenSidedDie Apr 28 '11 at 4:05
As of a few updates ago, the "SW Quadrant" rule no longer applies. Everything else is still applicable, however. – Raven Dreamer Aug 16 '11 at 20:47

Iron Golem Farm. The initial effort is immense but then the idea is quite fun on and by itself. Although the initial investment in railway to deliver necessary villagers may be rather... excessive; while the whole farm requires 13 iron total (a bucket and two hoppers) the most surefire way of delivering villagers is by rail, and that can quickly become quite costly.

Anyway, look up some tutorials on making an iron golem farm. Find a village. Gather lots and lots of cobblestone, quite a bit of wood, have a little lava handy, make an infinite water source at the site so that you don't have to run for miles...

Then busy yourself with building something near your farm and find a new stack of iron every hour or two deposited in the collection chest.

-
You can cure zombie villagers to start your own village, which would be a lot less iron-intensive than laying railroads, and only costs you 2 potions of weakness, and two golden apples (for two villagers, you can breed the rest). Plus the materials to make a brewing stand & "village"/holding pen. – Robotnik Jun 27 '13 at 23:55

I like to mine near lava; because it gives off light, I don't need torches. If you use Tab you should not fall into the lava. I just played singlemode and found over 30 iron ore in less than 30 minutes this way.

-
It's shift by default – shanodin Jun 25 '13 at 17:29

Scuba-Mining

One of the most common ways of finding Iron is to explore caves, primarily due to its efficiency. However, I found that Scuba-Mining presents a similar amount of efficiency and fun.

Step 1:

Find a sea are with the bottom made of stone. These can be quite rare in comparison to dirt, but I typically find these farther from the spawn point

Step 2:

Bring a pick, as well as a door. When at the bottom of the ocean, you can place the door and use the air blocks it creates to restore your breath. A more efficient form of Scuba-Mining requires a helmet enchanted with water breathing.

I typically focus on Scuba-Mining when I've exhausted nearby caves or I've created a base far from the spawn point. There have been many times that I've found few resources at the bottom of these oceans, but several successful mining runs have netted me multiple stacks of iron and coal.

-

I think it is most easy to look in caves that open to the surface. Another great method is looking around those gravel veins. You can find many ores when you do that. Even Diamond! But if you want lots of iron. It's a good idea to bring a pickax with the double wielding enchantment, which allows you to sometimes get double the item you are mining. :)

-

I like to play the Hunger Games a lot on Minecraft and so it's very important to be able to find Iron Ore very qucikly and as much as possible. My personal opinion is to find a spot, somewhere you just like or maybe just a random place, then dig straight down. I go to the Bedrock and then from there dig steps toward the surface, randomly digging out little rooms when I feel I might get lucky. If I do happen to find Iron, I dig around that area to make certain I have collected it all. But be very careful of water, lava, and monsters finding you. Good luck :)

-
+1 for "hunger games". – Sean McMillan Jan 30 '13 at 18:44

There are several ways to find iron. Many people use methods of branch mining in natural caverns or cave systems found when digging straight into the ground (that is if you are lucky.) Beginners have a good shot to find several pieces of iron ore when exploring caves (they lie on the side walls.) Since iron is found around sea level it would be a good idea to dig in sandbars that are closer to lakes. Don't get discouraged if you find a lot of dirt, this will quickly shift into stone, coal, iron, etc. the more you dig. If you are a bit more experienced, you can give a shot on digging a set of stairs that leads approximately 14-20 blocks deep. Branch mining allows a player to cover a large amount of space and stumble across several veins of iron/coal. In Minecraft, that deeper down you go, the rarer the resources. However, it isn't the best of methods because of the waste of area, as well as the risks of lava flow, monsters, and sudden falls. Stack up on many pickaxes and torches, and don't forget, enjoy the game, don't make it a job.

-

Gravel Veins

You want my advice? Tackle those 'annoying' gravel veins! I personally jump for joy whenever I find a vein of gravel, because I know that you will find ores more often if you go through veins of gravel, and this includes iron. I personally find lonesome veins of iron very rarely, but when I go after gravel veins, I can find about 2 veins of iron, and a sizable amount of coal in the process too! Of course, finding caves is a good method too, but they carve away the rock, which includes the iron ore. Thus, you can find many veins of iron in a cave (and I'm not discounting the fact that it's a good idea) but they tend to be fairly small. Go after gravel, it tends to yield more coal and iron. If your searching for other types of ores, your on your own, this trick only works with coal and iron.

----- ---- --- -- - - - - - -

Minor Edit

This method occasionally is a bit fruitless, but it does yield good results when you find the ores. You can also try mining around the gravel vein a bit, just to make sure you don't miss anything.

-

Dig straight down under sand, you will find dirt and then iron.

-

get near the bottom of the map and dig in a straight line until you hit dirt. Dig out all of the dirt that you can see with a shovel. It is faster than digging stone and yields better results. When the dirt is all dug keep going in a straight line and repeat. bring 1 diamond/1 iron/2 stone pickaxes and 1 diamond/2 iron/4 stone shovels.

-
Can you provide any references to support this? – sync Nov 12 '12 at 10:59

Iron, fortunately, spawns close to sea-level. This means that an easy way (if a little time consuming) is to simply walk around the overworld until you find a cave entrance, and then explore that cave, you'll find, if you're lucky a vein of iron or two (don't forget to mine out all the blocks adjacent to any iron you find - 'veins' of iron can sometimes connect diagonally).

This gets you maximum iron with minimal digging, assuming that it is faster to explore a cave / walk to the next one than to mine blindly through the earth.

The other option is using an external minecraft utility, either to directly edit iron (or iron ores) into your inventory, or using something like minecraft xray to find the closest veins of iron (after which, you can dig directly towards).

-
Please don't suggest cheating. Minor correction: veins connect diagonally only when two veins are randomly generated beside each other. There's no point to digging around ore, except diamond, which is in danger of dropping into lava when mined. – user6234456 Apr 25 '11 at 13:44
@serenity - given that minecraft is strictly noncompetitive, I don't think "cheating" is the proper term here. I mention it so that those who want it can find out more about it, and those who don't, won't. – Raven Dreamer Apr 25 '11 at 15:04

protected by OakJun 28 '13 at 12:54

Thank you for your interest in this question. Because it has attracted low-quality or spam answers that had to be removed, posting an answer now requires 10 reputation on this site.