Take the 2-minute tour ×
Arqade is a question and answer site for passionate videogamers on all platforms. It's 100% free, no registration required.

I'm on the hunt for melons, and one place I'm fairly sure I can find them is a mineshaft. Which leaves me back at square one, how do I find a mine shaft? It seems they were made substantially harder to find between 1.8 and 1.0.

What's the fastest way to find a mineshaft?

share|improve this question
2  
In 1.3 you can trade with town folk and one of the possible trades is for melons! So, you don't have to find a mineshaft if you have a village and get lucky. –  Chris Nava Aug 17 '12 at 5:56

12 Answers 12

You can usually find them deep underground in ravines. They can actually be on any layer though, seen in the following video.

share|improve this answer

Just look inside natural caves. You will need space in your inventory because you might have to dig.

share|improve this answer
1  
What does needing space in your inventory have to do with digging? –  Jeffrey Lin Nov 3 '12 at 0:32

I happen to have a very good way of finding these, simply explore a stronghold that you find and 9/10 times it has an abandoned mine shaft running through one! It really works, and you can even prove it if needed. Example: on the seed "gimmeapoo" (this spawns you near an npc village that is in a shallow lake!) you will find abandoned mineshafts intersecting a stronghold at this location (-379, 27, 786). Be forewarned, very early on you may find random spiders (the regular kind) in the shaft. This is due to a dungeon that generated above the mineshaft, but at the end of a more different one.

In short, stronghold = mine shaft.

also, in the example mentioned above, there is a dirt room at (-437, 21, 854)

share|improve this answer

Like many others say ravines can be found next to shafts, but also a fast but inefficient way is to mine to the bedrock in a two block area like this

--  
--  
--  
  __

The reason for mining two down is because you may fall into lava mining down by one block.

Then fill the area with tnt to blow up the space If that area does not work move to a different area.

share|improve this answer
1  
That is a good idea, but if you are not in create mode, getting the required amount of TNT is very hard. And to do it more than once? You would need a lot of TNT. –  Shadow Z. Jun 17 '12 at 12:54

I've found one in single player in a ravine with floating wood blocks and fences around it.

You can also build a tall tower to search for ravines - just remember to create a safe way to get down from the tower.

share|improve this answer

I had the same problem (needed melons) and the same quesion (how do I find a mineshaft?) about a week ago. I spent about 3 days cave delving hoping to find one without any luck and started to browse through wikis. SUCCESS!! Apparently, for whatever reason, there is a near certainty of abandoned mineshafts being generated underneath desert biomes. Sure, they show up other places as well, but for some darn reason desert biomes almost always have one.

After finding this information I dug under the first desert biome I found, and sure enough found an Abandoned Mineshaft. Worked for me. Might work for you.

Source

Check the Exploration section.

share|improve this answer
1  
My experience supports this. I dug down through a mountain at a 45 degree angle until I was deep under it, then dug horizontally when I heard water and monsters. I happened to have dug outward under a desert area, and the mineshaft I found was very extensive. It may actually be many shafts crossing each other, and it's taking me forever to search through it. –  gnovice Feb 3 '12 at 0:49

Just run around and dig down. If you dont find one, go to a different place and do the same thing. Use the rocks/dirt and what not two fill back up your hole. You can put some light where you tried but if you don't find one where you first look, you must travel kinda far because mineshafts are very big.

share|improve this answer
1  
As the numerous other answers indicate, there are many improvements over blind search. –  blubb Mar 31 '12 at 23:30

The fastest way I find mineshafts is by swimming in deep water. Deep Oceans will crape the top of the mine shafts open. The same goes with ravines. Bring some ladders with you to place on the walls to provide air once you get down there.

share|improve this answer

Ravines are perhaps the best in game method to find mineshafts, simply because there's a high chance that a ravine will intersect the shaft. However, the absolute quickest way to find a mineshaft would be to use one of the 3rd party mapping tools (Cartograph G is probably the best choice for this) to generate a map of your world and a map of fences, planks, and rails and combine them together to get a map of areas that likely contain mineshafts. Protip: Generate a 2d top down map (not the isometric view) to figure out exactly where things are. The Isometric views of a lot of mappers are confusing for finding exact locations.

share|improve this answer

Abandoned Mine Shafts are not locatable by any special means, but they have the characteristic of significant horizontal extent. Find a ravine, then search its length. If a mine shaft intersects a ravine, there will be wooden structures floating in mid-air in the ravine.

There must be a minimum and maximum depth (Y coordinate) at which mine shafts occur, so you could also limit your search to those levels, but I don't see that documented on the wiki.

share|improve this answer
    
I have looked through roughly 10 ravines, and never found an abandoned mineshaft. What frequency do the mineshafts/ravines intersect? –  John Dec 18 '11 at 18:09
    
@John — I doubt that's easy to calculate. The advantage to searching ravines is that they are effectively a large plane embedded in the world, which gives them a higher chance of intersecting other structures than, say, caves. –  Ben Blank Dec 20 '11 at 20:20
    
@BenBlank Was just looking for a wiser/more experienced player's perspective/guestimate –  John Dec 20 '11 at 20:30

The other option I use when specifically trying to find mineshafts is to build a very tall tower and stand on it, then disconnect. When you reconnect you get some time before all the chunks around you fully render, which gives you enough time to target all the ravines, mineshafts and lava pools in the vicinity.

(may not be fully in the spirit of exploration :-)

share|improve this answer

Abandoned Mineshafts are obvious once you've spotted them, since (with the exception of the libraries within Strongholds) they are the only naturally generated structures that use wood and fences. In addition, there are Cobwebs scattered around them, especially around Cave Spider spawners.

There aren't any surefire ways of finding Abandoned Mineshafts, but you could start by exploring various caves, and once you see Wooden Planks, you know you've find one. The Minecraft Wiki page suggests looking for a ravine, since Abandoned Mineshafts are sometimes found intersecting them, and the wood structures will be a dead giveaway. They're not like Strongholds where you can use Eye of Enders to find them; you'll have to go spelunking if you want to find the mineshafts.

share|improve this answer
6  
Go for the sounds of spiders if you can - cave spider spawners could be nearby! –  Raven Dreamer Dec 17 '11 at 6:24
4  
+1 for look in ravines. =) Also, you can use a bucket of water to rappel down the side of the ravine. –  Kenneth Posey Dec 20 '11 at 19:29
    
The interior surface area of ravines is so large that not seeing a AMS is very improbable. –  Sonic42 Feb 3 '12 at 1:21

protected by Oak Jun 16 '12 at 7:05

Thank you for your interest in this question. Because it has attracted low-quality answers, posting an answer now requires 10 reputation on this site.

Would you like to answer one of these unanswered questions instead?

Not the answer you're looking for? Browse other questions tagged or ask your own question.