Arqade is a question and answer site for passionate videogamers on all platforms. It's 100% free, no registration required.

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

I've been watching video tutorials and doing some Googling, but I just haven't been able figure out exactly how you're supposed to rendezvous with a ship in orbit. I always either end up somewhere in its orbit where it absolutely isn't, or in an orbit with terrible intercepts but no idea how to fix it.

As a concrete example: how would you dock with a ship in a circular orbit up at 250 KM? What would your aphelion and perihelion be at every stage? And most importantly, when you mess up completely, how do you fix it?

share|improve this question
up vote 57 down vote accepted

There are several steps to successful dockings. Click on images for larger view.

  1. Set your target as your target. Set Target
  2. Time your launch: A general rule of thumb is to launch when your target is just rising in the west (unless your target is in a retrograde orbit). If your target isn't in an equatorial orbit, then you'll also want to launch when the orbital plane crosses your launch site. Time your launch
  3. Launching: this is pretty standard. One key thing to remember is to set your apoapsis to meet your target altitude. Circularize as per the next step. Launch
  4. Closing the gap: if you're leading your target (in front of it), you'll want to increase your orbital period. Burn prograde to increase your apoapsis about 5km higher than your target, or until the intercept minimizes. In a similar vein, if you're trailing your target, you'll want to decrease your orbital period by lowering your periapsis. Also take this time to make your orbits co-planar by burning in the normal or anti normal direction at the descending or ascending node respectively. If you're already within about 5km, you can skip this step. Close the gap
  5. Initial approach: by now, the nav ball should be in target mode. In this mode, your velocity vectors indicate the relative velocity between you an your target. Keep your prograde vector pointed at the target, and reduce your relative velocity to under 50m/s. As you close in, continue making adjustments to your course to keep your velocity vector on the target indicator and continue reducing your relative velocity. Initial approach
  6. Final approach: by the time you're within about 1km, you should have a relative velocity less than 10m/s. Hopefully you remembered to orient your target ship such that one of the ports is pointing north or south (for equatorial orbits, normal or anti normal in general). Point yourself in the opposite direction, thus making the axis of the two docking ports parallel. Now you can switch to docking mode, as you don't want to use your main engine anymore. Change your view to Chase by hitting V a few times. Now use translation controls to line up the axis of your docking ports, thrust forward, and let the docking ports magnetism do the rest. Just not too fast. Keep it under 1m/s within 10m. Final approach Docked

As a side note, I screwed up this particular approach because I wasn't paying attention and didn't reduce my speed as I closed in. I shot past the target ship and had to correct. Additionally, you'll note that I didn't in fact change to docking mode. This is a personal preference, and I use both hands on the keyboard to control my attitude with my left had (WASDQE) and translation with my right hand (IJKLHN).

share|improve this answer
Also, I did up this video tutorial as well. Its got more steps, but they're fairly congruous with the steps above. – MBraedley Jan 4 '13 at 19:43
This answer sickens me with its excellence. – fredley Jan 4 '13 at 20:58
If you look closely at the image for step 5, you'll see that the prograde vector indicator is over the target indicator. The easiest way to do this (although not the most efficient way) is to kill your relative velocity (by burning in the relative velocity retrograde direction) and then turn towards the target and burn again. If your prograde indicator drifts from the target indicator before you get within about 100 meters, repeat the process. – MBraedley Apr 16 '13 at 14:49
@grom: And I also did up a video explanation. Check it out, hopefully it explains things a bit better. – MBraedley Apr 17 '13 at 2:14
@EthanBierlein: There really isn't any difference with FAR, other than you're limited in what you're capable of doing in the atmosphere. FAR has no impact once you're in space, so the only place there could be a difference is during the launch. Even with that in mind, you're still going to launch at the same time, and you're still going to follow a similar launch trajectory, except only constrained by aerodynamics. Once in orbit, it's exactly the same procedure with and without FAR. – MBraedley Mar 21 '15 at 16:45

You want to put your ship at a very similar orbit with your target, larger if you are ahead, or smaller if you are trailing. If the approach is about >100km, you want to wait an orbital period to see if the approach is closer in the next loop, remember F5 is your friend. When the approach is ok, you can use a maneuver node at the ascending or descending node to make a maneuver to get the approach within 1km.

When you get close enough, all you have to do is kill the target relative velocity to within 10m/s. Then when you are close enough, line up the ports and the ships will join. Not too hard if you do your F5 and F9 correctly

share|improve this answer

I imagine you will want to put yourself in an orbit just inside out just outside that of the satellite you wish to link up with, so that your orbital period is slightly longer or shorter. When you are close you should then be able to switch to maneuvering thrusters to dock.

share|improve this answer
What does "just inside" or "just outside" mean? – Tacroy Dec 25 '12 at 15:06
Lower or higher compared to your major gravitational body – theheadofabroom Dec 26 '12 at 11:48

protected by Community Aug 30 '13 at 0:27

Thank you for your interest in this question. Because it has attracted low-quality or spam answers that had to be removed, posting an answer now requires 10 reputation on this site.

Would you like to answer one of these unanswered questions instead?

Not the answer you're looking for? Browse other questions tagged or ask your own question.