1

I can't remove items from Carpenter using item-ducts.

I have tried with and without power to the wood extract pipe. I have tried with the chest stuck directly onto the carpenter. I have tried with peat, stirling and combustion engines. I've waited ages.

What am I missing from my setup?

This is my setup:
enter image description here

Pic 2 shows (I think) the first 4 wood pulp are made but I can neither extract manually or using wooden transport pipe to a chest.

enter image description here

3
  • Did you try with the chest on the other side? From what I can remember, you can only extract it's from carpenters from the right side.
    – Ben
    Commented Oct 19, 2014 at 13:26
  • I tried all sides. I looked at videos and duplicated their set-ups. I am running MC 1.7.10, Forestry 1.7.10-3.1.1.4, Buildcraft 6.0.18, and Industrial-Craft-2-Mod-Experiment-1.7.10. Could the IC2 be a conflict?
    – Screeching
    Commented Oct 19, 2014 at 13:56
  • Tried other recipes as well. Googled until my eyes bled. Tried all sorts of different configurations. Need a lie down :(
    – Screeching
    Commented Oct 19, 2014 at 14:14

1 Answer 1

2

Your engine at the lower right isn't connected to the carpenter -- wooden kensis pipes need another pipe (stone keneisis or cobblestone kinesis are fine) between the wooden pipe and the thing receiving power.

You'll need a separate engine (just a redstone engine is fine), delivering power to the wooden item pipe.

Also, an extra stone/cobble item pipe between the wooden pip and the chest.

2
  • I cannot connect any input pipes to my Carpenter. But I have found that connecting the engine directly to the Carpenter makes the Carpenter work normally. So at least I have a working Carpenter. But I still have to figure out why I can't connect Kinesis pipes to the things I want to power - eg Carpenter, Thermionic etc. My thanks to those who answered :)
    – Screeching
    Commented Oct 19, 2014 at 19:54
  • I hadn't got my head around the different types of power used in the different mods, but now I have. Thanks again all :)
    – Screeching
    Commented Nov 4, 2014 at 22:30

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.