Using a Farm and a Combine I have a sweet automatic farm set up, which churns out wheat and bread. The only problem is I have to go and fuel the engines (Hobbyist steam engines) every now and again to make the thing tick over.

I'd like to use solar power for an unattended farm. I'd use the solar to drive electrical engines. How many solar panels would I need? Is it possible to use only enough solar panels to power one machine, and alternate which engine is powered using redstone? (the turnover is slow, so alternating every few minutes between machines would be fine.)


How many solar panels you need is up to you. Even though Forestry farms drain a lot of power, they're A-OK with receiving very little, and in fact I'd recommend that because you get seriously diminishing returns if you power them fully.

The wheat farms especially, because it only has to harvest the crops and replant. Other farms have to do a lot more (such as harvest multi-blocks structures, replace soil blocks, gather loose items). The wheat grows on its own, and you're probably OK with the farm and harvester taking a bit to harvest and replant.

On Forestry easy mode, I'd say 1-2 MJ/t is enough between the two machines to keep things going, which means a single electrical engine (Choke upgrade or not). You don't have to alternate, a forked conductive pipe will do the trick. I recommend giving the electrical engine double its intake so it can run through the night (obviously you're gonna need a buffer like a BatBox as well). Maybe a bit more so it can cope with inclement weather.

Let's say you have that engine set up with Choke and Efficiency, which means 3 EU/t. Use 3 solar panels to have it running during the day, 6 and a buffer to have it run through the night as well, and maybe 7-8 if you don't want rain to slow it down too much. (Although day is a bit longer than night, so it should slowly build up a buffer even with 6 solar panels.)

| improve this answer | |

I'm currently powering one Farm and Combine using an LV Solar Array. The Electrical Engine draws 4 EU/t (with an Iron Tube circuit board to make it Efficient). I suppose I could get away with four basic solar panels, but the constant 8 EU/t means that my batbox buffer collects some extra and keeps it all running a bit into the night. It also means alternating the BC power between the machines is unnecessary – there's plenty to go around.

| improve this answer | |

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.