7

I'm making a map and there's gonna be a lot of blasting going on and I don't want it to damage blocks.

I've done /gamerule mobGriefing false but there's still gonna be TNT block damage.

Is there a way I can turn that off too?

  • You can also use bedrock or obsidian. These are indestructible blocks. – The Idiot Gamer Nov 14 '14 at 21:51
  • But I have a circular room with a glass dome and they are both highly destructible and If I change them with bedrock or obsidian it will look ugly – FireStrike289 Nov 14 '14 at 21:59
  • Do you want explosion damage? – ModDL Nov 15 '14 at 3:39
  • No I don't. But @MBradley just told me how to do it but I did something wrong so I asked him on that. – FireStrike289 Nov 15 '14 at 3:40
  • I was thinking of straight up replacing a exploding tnt with an exploding creeper – ModDL Nov 15 '14 at 3:51
11

So this is complicated, but not much worse than preventing a player from crafting a diamond sword. The biggest difference here is that everything must happen on the same tick, and it must happen every tick. This precludes the strategy I used in the linked answer; a 20hz fill clock is pretty much a necessity, whereas I could use a slower, simpler clock in that other answer. For this to work, you're still going to want to disable mob griefing, as I'm using ghast fireballs to create the actual explosion. It's also possible to have the effect, but cause 0 damage to players or other entities, and I'll add the commands for that at the end.

The first step is to set up a scoreboard objective to track TNT that's about to explode:

/scoreboard objectives add TNTGoBoom dummy

Next, we need to set up a fill clock. You'll need two command blocks in a column with an air block separating them. In the bottom, enter the following command:

fill ~ ~1 ~ ~3 ~1 ~ air

and in the top one, enter this command:

fill ~ ~-1 ~ ~3 ~-1 ~ redstone_block

Put a redstone block between the two, and you have your fill clock. Ideally, this won't be near a chunk boundary, but mine was and it still worked fine. Funny stuff can start happening if part of a fill clock gets unloaded from memory, but if it's a spawn chunk or you're always near the clock, you don't have to worry.

You should see three more redstone blocks out one side. You're going to put down three more command blocks adjacent to the redstone blocks (preferably above or below). In order of closest to the first two command blocks, the commands you want to use are:

scoreboard players set @e[type=PrimedTnt] TNTGoBoom 1 {Fuse:0b}
execute @e[type=PrimedTnt,score_TNTGoBoom=1] ~ ~ ~ summon Fireball ~ ~ ~ {direction:[0.0,-1.0,0.0],ExplosionPower:4,Fuse:0,Time:-1,TileEntityData:{CustomName:"TNT"},ActiveEffects:[{Id:14,Duration:10,Amplifier:10,Ambient:1}]}
kill @e[type=PrimedTnt,score_TNTGoBoom=1]

Okay, let's go over those three commands. The first sets the scoreboard value for the TNTGoBoom objective to 1 for every TNT that's ready to explode on the next tick. This is how we track the TNT. The next command summons an invisible fireball at the exact location of the TNT, moving directly downwards, and with the same explosive power of a piece of TNT. This is what will actually cause the explosion effect and damage to players/entities, but since mob griefing is turned off it won't damage the terrain. Finally, we kill (effectively delete) the TNT that's about to explode so that it doesn't damage the terrain.


Now if you want to still have the explosion effect without causing any damage, then you need to replace the fireball summon command with 2 command blocks (and therefore extend your fill clock by one more block):

execute @e[type=PrimedTnt,score_TNTGoBoom=1] ~ ~ ~ particle hugeexplosion ~ ~ ~ 0 0 0 1
execute @e[type=PrimedTnt,score_TNTGoBoom=1] ~ ~ ~ playsound random.explode @a ~ ~ ~

These two commands create the particle effect and sound of TNT exploding, but that's it. There's no damage to the world, players, or entities if you use this instead of the fireball method.


Addendum: So this is really going to mess up things like TNT cannons. I had this running in my creative world where I was previously testing an infinite TNT cannon, and while it kinda works (the projectile TNT still shoots out a bit), it has a tendency to send a fireball into the sky. Also, using this means that each TNT block needs to be lit individually, since with mob-griefing off, the fireball won't light others nearby. I'm sure there's a way around this with a little more command-block-fu. Actually, I know there's a way to do this, I'm just not 100% on the details yet.

  • I tried and that didn't work, is there something I'm missing like with the 3 commands are they meant to be in a specific order? Also are the redstone blocks meant to be flashing? – FireStrike289 Nov 15 '14 at 3:31
  • Nvm I got it. Thanx – FireStrike289 Nov 15 '14 at 4:11
  • Is there a way I can make the fireball do more damage or instead of a fireball make it a creeper because it doesn't do enough damage for it to be used as an efficient weapon – FireStrike289 Nov 15 '14 at 14:13
  • Yeah, just up the explosion power attribute. I can look into using a creeper instead, but I initially didn't have success with that. – MBraedley Nov 15 '14 at 14:16
  • Nah the explosion power is fine I just need it to do more damage. – FireStrike289 Nov 15 '14 at 14:21
1

This is a theory I have had, it's a little confusing and I am still working on making it work. If you can make it so a command blocks finds the TNT ( with the test for command) and makes it so it spawns a creeper with a no explosion delay, and makes the creeper's explosion off (game rule mob griefing off). After it is spawned make it so that the entity of lit TNT is killed. In short you would lite a TNT the TNT would disappear and replace with a creeper that instantly explodes.

  • Could you elaborate? – aytimothy Aug 15 '15 at 9:43
0

Not in Vanilla Minecraft, no.

You would need a server plugin or a mod (preferably WorldGuard) to do this.

There is a good question here that shows how you can do this with World Guard.


Source

0

Make a contraption that makes a command block go on and off and on and off and on, etc, etc. now, type /kill @e[type=PrimedTnt] in the command block. This will destroy tnt as soon as it is set. SIMPLE!

  • I want it to do player & mob damage. – FireStrike289 Nov 16 '14 at 7:02
  • If you look at my answer, you'll see that I'm doing this, and a whole lot more. – MBraedley Nov 16 '14 at 18:06
0

do not use TNT, just use an instant exploding creeper by using /summon creeper x y z {Fuse:0} or if you want all tnt is not damaging any block use

summon a charged creeper at the location of the TNT by putting /execute @e[type=PrimedTNT] ~ ~ ~ summon creeper ~ ~ ~ {Fuse:0} in a clock, and use /kill @e[type=PrimedTNT] in a clock too

-2

When a PrimedTnt is about to explode (fuse is 1 or 0) replace it with an invisible creeper. I'm not going to put the commands, but I saw a youtube video by Sethbling called "Zelda Bombs in Minecraft" which uses that mechanism, among others

  • For this to be a decent answer, at the very least link the video, or better yet include the commands used. – DBS Dec 25 '15 at 17:06
-3

I'm not sure, but try this: /gamerule tntdamage false

Not the answer you're looking for? Browse other questions tagged or ask your own question.