30

On Christmas Day 2010 my PS3 stopped reading discs so I bought a new one, took the hard drive out of the old one, wiped/formatted it and used it as a portable hard drive.
But today I've found a possible fix to get my old one working again.

If I wipe the hard drive and stick it back in, will it work? Or do I have to have certain files / directory structure? How do I install a new hard drive into a PlayStation 3?

Improve this question

3 Answers 3

Reset to default
30

Yes it will work, but you will need to download the PS3 firmware and put it on a USB stick for installation:

To transfer the update data to your PlayStation 3, save the file to a PS3 compatible storage device such as Memory Stick, Memory Stick Duo, USB drive or PSP.

Before starting, use your PC to create a folder named 'PS3' on the storage media or USB device. Within the folder, create a folder named 'UPDATE' (This folder name is case sensitive and must appear in all capital letters). Once the UPDATE folder has been created, download the PS3 system software update to this location.

It will either request this when you turn the PS3 on for the first time after putting the hard drive in, or you may need to put it into service mode for it to install by following the instructions below, and then choosing the "System Update" option:

Since the 2.5 update the PS3 has a Recovery menu with the following options:

  • Restart System: Restarts the PLAYSTATION®3 System.
  • Restore Default Settings: Reset all system settings back to default.
  • Restore File System: Checks for corrupt/missing system files.
  • Rebuild Database: Rebuilds the OS for the PLAYSTATION®3.
  • Restore PS3 System: Fresh restore; Deletes everything and starts from Scratch.
  • System Update: Update the PLAYSTATION®3 System

How to get access to service mode:

  • Make sure the PS3 is turned off,
  • Press and hold the power button on the PS3 it will power on then power off.
  • When it's off press and hold the power button again until you hear two consecutive beeps.
  • It will ask for the controller to be connected via the USB cable,
  • Turn on the controller and you will have access to the menu.

Source: http://www.waltercedric.com/gadget/262-sony-ps3/1444-ps3-factoryservice-mode

Improve this answer
1
  • Also, if he had the original one and a SATA-to-USB cable he could clone the drive by using Disk Utility or Super Duper.
    – RedEagle2000
    Jan 8, 2016 at 0:38
1

To access the hard drive utility:

With the blank drive in the PS3, it will complain that the correct drive has not been found. Press and hold the power button. It will beep immediately and then beep two more times. Release the power button and hold it again. It will beep immediately and beep again. Release button and it should ask you to connect controller with wire. You then can format and install the PS3 system on new drive.

I formatted a 500M drive successfully with utility. PS3 system had no trouble copying and running from drive.

Improve this answer
1

I had the same problem

I have : 1. Macbook pro 13inch - 2015 2. 2 1gb usb thumbdrives - in case 1 doesnt work, mine- first 1st didnt work, but second thumb drive worked. 3. PS3 slim (2010)

Solution (Mac version):

  1. Download the latest PS3 update v 4.81 (i think) Just google it and download from your "COUNTRY OF PURCHASE" playstation website.
  2. Format both thumb drives (if 1 doesnt work, the other will work) as "Master boot record", FAT32.
  3. Format HDD internal harddisk (PS3) to "Master boot record",FAT32 - using external hard drive enclosure. Ex: https://www.pbtech.co.nz/search?sf=SATA+to+USB
  4. Place xxxxx.PUB file into thumbdrive - PS3/UPDATE/
  5. Now put everything in place, start PS3 in safe mode, choose option (6) - Software update.

Voila!

Improve this answer

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .