5

I am trying to make a 5 high by 6 wide cube of redstone lamps to work all at once but I'm having issues getting them to work. They need to be wired so that you can turn them on and off with a clock.

Here is what one corner looks like currently.

enter image description here

Here is the wiring I've tried so far.

enter image description here

Basically I'm clueless as to how I can wire the other wall and have all the lamps light up. The power is coming from underneath the center block.

3
  • I feel like I have the solution, let me try.
    – ave
    Jan 10, 2016 at 11:18
  • Are there lamps in the corner between the two walls?
    – SirBenet
    Jan 10, 2016 at 13:05
  • @colorfusion nope
    – spy-killer
    Jan 11, 2016 at 2:31

2 Answers 2

8

That's not possible with lamps in the corner

The problem, as I am sure you are aware, are the corner blocks. Take a look at a two high section:

MWE variant 1 MWE variant 2

To light up the corner blocks, we need to power an adjacent lamp directly, by pointing either a repeater/comparator, a line of redstone dust, or a torch (from below!) into it. Simply powering the adjacent lamps (such as by placing a redstone block/torch next to them) won't do. We can't do that directly on the corner blocks, meaning we have to power either both green or both red blocks directly.

However, none of the methods capable of directly powering a block fits in a 1 high space. Nor are there ways to directly power two blocks on top of each other at once, making a 5 by 6 full cube impossible.


Solution without corner blocks

However, if you leave out the corner blocks, it's definitely doable, although a bit of space below will probably be needed. The corners are still tricky, but you can use a torch/block/dust tower to light up most of it. The torch is connected to the input (green) underground.

Click on the images to enlarge them.

enter image description here enter image description here enter image description here

1
  • This turned out to be a complicated wiring thanks for the help
    – spy-killer
    Jan 11, 2016 at 2:32
0

Powering corner blocks from the cube inside still remains an unsolvable issue, because no block around them can be directly powered, and neither the corner themselves, thus making the full cube impossible.

However, a similar solution can be achieved in this way: four wall of lamps powered from the inside

Here's the world download. Some screenshots of it are shown below.

outside

bottom internals

core internals

Or either in THIS way. This is a 6 wide 5 tall lamp cube with no top level, except for the redstone layer, unfortunately necessary.

Second world.

enter image description here

These are the closest you can get to your initial idea, or at least, as close i could figure out :)

6
  • How did you solves the corner block problem?
    – Ferrybig
    Jan 21, 2016 at 21:24
  • I've edited your answer to improve the formatting, but if you're going to say you've debunked MrLemon's theory it's best if you back it up.
    – childe
    Jan 21, 2016 at 22:14
  • Sorry, i didn't mean to sound rude at all. Thank you Nitros for the edit if you thought it seemed like this. I think the best way is always show don't tell, so if you want, download the world and see how i managed, but I'll try to explain. The two upper layer were easy: redstone wire. The two lower, torches. The third was the tricky one, i had to figure out how to power the four of them symmetrically. Now, if you directly power a block, each block touching one of the five faces left will be powered too. I only had to figure out how to do symmetrically and it was done :) Hope it's clearer now
    – Herohares
    Jan 21, 2016 at 22:55
  • 1
    This doesn't really debunk my theory. You only power the middle corner block from the inside, which is fairly easy. It's still impossible to do that for two blocks on top of each other. Still, your solution with the redstone wire and torches on top/below the wall do work if the roof and floor are allowed to come out by one block.
    – MrLemon
    Jan 22, 2016 at 9:05
  • I suggest you edit the explanation into your answer. Comments are temporary.
    – MrLemon
    Jan 22, 2016 at 9:05

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .