Each engine has a vacuum thrust and an ASL thrust. Presumably, there is a linear relationship between thrust and outside pressure. Or, as pressure increases from 0 atm to 1 atm, thrust decreases from the vac thrust amount to the ASL thrust amount.

This seems intuitive to me, but it is only an assumption that my question is based on. Is this correct?

Now my question: what happens above 1 atm? Both Jool and Eve, as well as planets available from mods have atmospheres with a higher pressure than Kerbin. Does thrust continue to scale down to 0? Or is there actually some type of asymptotic/logarithmic relationship between thrust and pressure? Perhaps the ASL thrust is as low as an engine can get?

  • 6
    I am away from KSP, but from what I remember, each engine have its own thrust curve in atmosphere, located in its config file, to simulate how engine bell affects thrust and isp. You will need that data. Here is old example of what you will end up with: i.imgur.com/nWGupvO.png
    – PTwr
    Aug 19, 2016 at 11:28

1 Answer 1


Looking at the config file for the stock LV-T45 engine, for example, I can see this:

minThrust = 0
maxThrust = 215

Also, the curves (its key = {#atm} {ISP})

    key = 0 320
    key = 1 250
    key = 6 0.001

So it seems that while the thrust obviously is a set range, the atmospheric efficiency for this particular engine drops considerably above 1 atm. I would assume that the game interpolates the values for 2-5 atm, based on various articles I've seen around the web, and also for the fact that the efficiency doesn't change drastically when you go from 0 to 1 atm, and vice-versa. It's a gradual change, so the same should be true for going from 1 atm to 6 atm.

Not all engines use the same points either. The Mainsail engine, has three atmospheric points, but this time they are 0, 1, and 9:

    key = 0 310
    key = 1 285
    key = 9 0.001

This would lead one to believe that the engine efficiency decreases more gradually in higher pressure atmospheres, taking 9 atms in order to reduce the efficiency of this engine down to almost nothing, as opposed to the LV-T45 which reduces to the same value in 6 atm.

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .