1

I have made an error in my base, meaning that I have a single side of wooden wall piece with the soft side facing out. What are my options for fixing this?

I can demolish it slowly with an axe and re place it the start way - or if I upgrade it to stone would the rotate piece option be enabled for a bit again on the hammer? I don't want to run the risk of upgrading it to stone without being able to rotate it as that would be a real pain to demolish!

0

2 Answers 2

2

You can upgrade the wall to stone or metal and then rotate it, otherwise @kevinthegreat is correct, you will have to demolish the wall and replace it.

EDIT: When upgrading you can rotate a wall when you go from twig -> wood, wood -> stone, stone -> metal and metal -> armoured. Once the wall is fully upgraded or if you skip straight to armoured you cannot rotate it via upgrading.

1
  • 1
    if you skip to armored there is no rotation cause there is no reason to rotate. there is no soft side to armored. thus no rotation Dec 4, 2018 at 14:06
0

You are going to have to demolish it, after placement there is a 10 minute window in which you can rotate the wall, source.

1
  • 1
    Your quoted source says there is also a 10 minute window after upgrading too.
    – Nelson
    Feb 25, 2018 at 15:06

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .