Someone told me that I should do the 'Epic Arc' that starts with Sister Alitura so I managed to find her but I'm stuck on the second mission. There are a couple of red ships and they get through my shield really quickly so that I have to run away, dock in a station, wait for my shield to repair and then try again.

How can I make my ship tougher so that I can finish of the NPCs without running away?

Edit: I'm using a Rifter

  • You should post your exact fit here and which ship you are using. If the epic arc is too hard, you might have to learn a few more skills and do some lvl 1/2 missions in the meantime. The recent changes to the NPC AI in Retribution also have increased the difficulty of certain missions considerably, from what I've heard. Dec 12, 2012 at 10:50
  • You may need a larger ship if it's allowed for that mission. Battle cruisers make decent mission ships. Dec 12, 2012 at 14:19
  • @MadScientist: the difficulty buff comes from the AI patch, which allowed NPCs to aggro people outside of their normal aggro range, resulting in full pocket aggro. It is said to be corrected in wednesday patch.
    – Lysarion
    Dec 12, 2012 at 14:43

3 Answers 3


The Rifter is one of the fastest frigates available, as such you should "speed/signature tank" it, which means you try to outrun enemies rather than taking the full hits. The faster your ship and the smaller your signature radius the less damage you take.

You'll still get hit, but you're able to negate these by either of two ways: active tanking (Shield Booster) or passive tanking (Shield Extender). For new players, I'd consider active tanking to be the easier solution, as such I'd suggest the following fitting:

High Slots

  • 3 identical Autocannons; the biggest you can fit (200mm or 125mm)

Mid Slots

  • 1MN Afterburner (preferred) or 1 MN Microwarpdrive
  • Small Shield Booster
  • Invulnerability Field (or a specific Shield Hardener, if you're going to switch it based on enemies)

Low Slots

  • Damage Control (significantly improves your survivability for minimal costs)
  • 2 of the following (based on personal preferences; speed over damage, etc.): Gyrostabilizer, Nanofiber Internal Structure, or Overdrive Injector System

In case you'd like to try a passive tank, you can find a passive PvE fitting on the UniWiki. You could as well use armor tanking, but I wouldn't recommend it for starting the arc as a new player. While it offers protection, it also lowers your damage (by using up your low slots you could use for damage modifiers like Gyrostabilizers) and makes you slower (so easier to hit).


  • Try to pick enemy after enemy, do not rush straight into them, as they'll easily swarm and overwhelm you (especially Rogue Drones). These missions are harder than the typical level 1 mission you might have flown before.
  • Always keep moving. If you stand still or slow down, your enemies will have a far bigger chance to hit you more significantly, especially when in a frigate.
  • Only use your Shield Booster when you have to (e.g. shields drop below 50%). This way you're saving capacitor energy compared to running it all the time.

Later on

Keep in mind that some of the later missions in the story arc get rather tricky, there are three things to note:

  • If you see elite Rogue Drones (name starting with "Strain", e.g. "Strain Infector Alvi"), try to take them out first. These drones have Warp Scramblers, that will keep you from fleeing the site in case something goes wrong. This is the first and only encounter of Warp Scramblers for a while (they're rarely used below level 4 missions).
  • In one of the last missions you'll have to fight a named Battlecruiser that uses Energy Neutralizers against you (removing your capacitor energy). This might be a tough fight for a new player (in fact, I consider it the hardest enemy of the whole story arc), so consider bringing help or fielding something bigger than a frigate.
  • The last mission is rather easy, but you'll need quite some damage to break the boss' tank (his damage is pretty low, so you can use trial & error here).

What you're referring to is called 'Tanking' in EVE Online and there are three types of tanking you can use.

Shield tanking uses your shield and improves it by adding modules to your midslots (aka medium power slots).

Armour tanking uses your armour and improves it by adding modules to your low slots.

Speed tanking (or dodging as it is know in other MMOs) improves your ships speed and agility via mid and low slots and is combined with orbiting your target so fast that their weapons can't track and hit you. This is the best choice for a Rifter.

Once you know the basics it's just a matter of experimenting with modules and there's a comprehensive guide on the forums which will fill you in on the details.

To fit a ship for speed tanking in missions you basically need an Afterburner module in a midslot, two Nanofiber Internal Structure modules in low slots. In addition adding Overdrives or Inertia Stabilisers can help.

  • there are also low-slot modules for shield tanking... (look for "shield recharger" & "power diagnostic system" and their variations.
    – Lysarion
    Dec 12, 2012 at 8:30
  • 1
    True but I'm trying to give the general idea and not confuse a newbie. The link guide has all the serious details Dec 12, 2012 at 9:49
  • I can see I've got a lot to learn... Dec 14, 2012 at 23:21
  • Real pilots hull-tank.
    – Cyclops
    Dec 22, 2012 at 11:47

Ideally you want to adapt your ship to what sort of enemies you are going up against. From the arc guide, it appears you were getting beaten by Corpii, who use EM and Thermal damage.

For me, the hardest ones to do the first time were the last 2 fights. Chasing Shadows involved a cruiser sized ship that neutralizes one's capacitor. So "kiting" was a good technique: stay over 20km away and shoot long distance weapons at him. For Dagan, his tracking is rather slow, so "speed tanking" was what worked for me: orbit at 1000m and keep shooting.

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .