1

I have made an error in my base, meaning that I have a single side of wooden wall piece with the soft side facing out. What are my options for fixing this?

I can demolish it slowly with an axe and re place it the start way - or if I upgrade it to stone would the rotate piece option be enabled for a bit again on the hammer? I don't want to run the risk of upgrading it to stone without being able to rotate it as that would be a real pain to demolish!

Improve this question
0

2 Answers 2

Reset to default
2

You can upgrade the wall to stone or metal and then rotate it, otherwise @kevinthegreat is correct, you will have to demolish the wall and replace it.

EDIT: When upgrading you can rotate a wall when you go from twig -> wood, wood -> stone, stone -> metal and metal -> armoured. Once the wall is fully upgraded or if you skip straight to armoured you cannot rotate it via upgrading.

Improve this answer
1
  • 1
    if you skip to armored there is no rotation cause there is no reason to rotate. there is no soft side to armored. thus no rotation
    – Sir. Hedgehog
    Commented Dec 4, 2018 at 14:06
0

You are going to have to demolish it, after placement there is a 10 minute window in which you can rotate the wall, source.

Improve this answer
1
  • 1
    Your quoted source says there is also a 10 minute window after upgrading too.
    – Nelson
    Commented Feb 25, 2018 at 15:06

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.